Room Divider HT-1578
2020年12月4日
Metal Mesh Sunshade HT-1535
2017年2月3日Metal Partiton parameters HT-1244
Customization Options
Customization of any wire mesh pattern is easy. Ruttong's10+ years of manufacturing experience makes it possible to create the wire mesh you envision right for your project. We are likely to already have the tooling to produce what you are looking for and if not, we can design new tooling to make it within a few days.
Customization of any wire mesh pattern is easy. Ruttong's10+ years of manufacturing experience makes it possible to create the wire mesh you envision right for your project. We are likely to already have the tooling to produce what you are looking for and if not, we can design new tooling to make it within a few days.
ITEMS |
HT-1244 |
||
Material |
Stainless steel 304, 316, 316L |
Weft Diameter |
4mm×1mm |
Warp Diameter |
1mm×3 |
Weft Pitch |
7mm |
Warp pitch |
16mm |
Weigth |
5.82kg/㎡ |
Additional Information of decorative wire mesh cabinet inserts:
The maximum sheet size for Wire Mesh is unlimited and it is only limited by the shipping size. Jumao offers Rubber Retainer in clear, white, brown & black colors that is compatible for affixing Wire Mesh Grille Inserts into any frame style door. Rubber retainer not only requires less time for installation, but also maintains a professional appearance from the backside of a door.
The maximum sheet size for Wire Mesh is unlimited and it is only limited by the shipping size. Jumao offers Rubber Retainer in clear, white, brown & black colors that is compatible for affixing Wire Mesh Grille Inserts into any frame style door. Rubber retainer not only requires less time for installation, but also maintains a professional appearance from the backside of a door.
INSTALLATION INSTRUCTIONS OF DECORATIVE WIRE MESH CABINET GRILL INSERTS
1. Remove the cabinet door and place face up on your work bench.
2. Drill a 3/4-inch-hole 1/4-inch from the edges of the rail and stile in one corner to allow access for the jig saw bit. If working on a flat surface, determine the area you are desiring to cut out and draw the pattern on the cabinet.
3. Insert the jigsaw bit through the hole that you drilled in Step 2 and carefully saw along the edges of the rails or lines you drew. 4. Remove the piece you just cut out and sand the cut edges until they are completely smooth. When smooth, turn the cabinet door over so that the back side is now facing up.
5. Using a router, route a 1/4-inch wide by 1/4-inch deep groove around the inside edge of the cabinet door frame.
6. Sand the routed groove with a sanding block or sand paper until it is completely smooth.
7. Insert the decorative wire grille into the routed space in the back of the cabinet door. Use wire cutters to trim the wire to size.
8. Screw the wire grille into place or secure with thin molding strips or tabs.
1. Remove the cabinet door and place face up on your work bench.
2. Drill a 3/4-inch-hole 1/4-inch from the edges of the rail and stile in one corner to allow access for the jig saw bit. If working on a flat surface, determine the area you are desiring to cut out and draw the pattern on the cabinet.
3. Insert the jigsaw bit through the hole that you drilled in Step 2 and carefully saw along the edges of the rails or lines you drew. 4. Remove the piece you just cut out and sand the cut edges until they are completely smooth. When smooth, turn the cabinet door over so that the back side is now facing up.
5. Using a router, route a 1/4-inch wide by 1/4-inch deep groove around the inside edge of the cabinet door frame.
6. Sand the routed groove with a sanding block or sand paper until it is completely smooth.
7. Insert the decorative wire grille into the routed space in the back of the cabinet door. Use wire cutters to trim the wire to size.
8. Screw the wire grille into place or secure with thin molding strips or tabs.
